Page 1
Installation guide for stainless steel splashback Model code: CSBCURVE605 CSBCURVE705 CSBCURVE905 Contact Caple on 0844 800 3830 or for spare parts www.caple.co.uk...
Contents Safety Information Parts Guide to wall mounting and fixings Installation Care and Maintenance Guarantee Important – Please read these instructions fully before installing or using this product These instructions contain important information which will help you get the best from your product and ensure safe and correct installation, use and maintenance.
Dispose of all packaging carefully and responsibly. Parts Please familiarise yourself with the parts and accessories listed below Splashback Codes Description Finish Steel CSBCURVE605 600/750 mm Splash back Steel CSBCURVE705 700/750 mm Splash back Steel CSBCURVE905 900/750 mm Splash back Accessories included...
Guide to wall mounting and fixings Important note: Important: When drilling into walls always check that there are no hidden wires or pipes etc. If plastic wall plugs are supplied Make sure that the screws and wall plugs being used are suitable for with your product: supporting your unit.
Installation Caution: 2 people are required to unpack and handle the product, it is recommended that gloves are worn. Carefully remove all packaging materials including the foam base, dispose of correctly. 1. Ensure that the surface of the wall is flat, free of dust and dirt.
The original installation was completed by a qualified tradesman. Claims A claim will only be recognised by Caple if accompanied by a copy of invoice/receipt confirming the date and proof of ownership. This guarantee is in addition to and does not diminish your statutory or legal rights.
Need help?
Do you have a question about the CSBCURVE605 and is the answer not in the manual?
Questions and answers