Bimar VP456T Instruction Booklet page 18

USE
Warning: The fan can only be used if properly assembled in good condition.
The fan functions are operated with both the keypad of the control panel and the remote
control which must be pointed at the front (maximum distance of about 5m) towards the
control panel.
To replace the battery (type:
CR2025/3 Volts), move the tab
towards the centre "PUSH" (use a
small screwdriver) and
simultaneously remove the battery
holder. Replace the battery
(respecting the polarity)
and close the battery holder. If the remote control is not used for long periods of time,
remove the battery.
The fan has the following setting and control elements:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18
"L" screw
Base with
counterweight
Ring
Remote controller
Drive shaft
Rod fixing ring nut
Adjustable hose
Floor fixing screw
Control panel
Plastic ring screw
Front grill /
protective screen
Rear grill
Propeller
Column
Rear grill fixing ring
nut
Fan fixing ring nut
Handle