LAVAZZA CLASSY PRO Instructions Manual page 14

EN
CANCELLING THE SUPPLY
The supply of the required beverage can be can-
celled either by pressing the selected button
again, or by pressing the multifunction button
The machine will stop supplying and display the
screenshot below.
Lift and then lower the capsule loading lever to
unload the exhausted capsule.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with
steady white light.
NO WATER
The machine will not supply the beverage if the
water in the tank is not enough.
The machine will show the following animation.
Fill the water tank up to the MAX level indicated.
For a new supply cycle, wait for supply buttons
and multifunction button turning on with steady
white light.
14
PREPARING THE BEVERAGE
.
FUNCTION STAND-BY
After the set time of inactivity, the machine
goes into stand-by mode.
In Stand-by mode, the buttons are off and the
MULTIFUNCTION button
slow-blinking light.
To exit to stand-by mode , press a button or open
the capsule loading handle.
It is possible to change the time before stand-by
from the machine menu options.
turns on with