Placing The Camera On The Cyber-Shot Station; Removing The Camera From The Cyber-Shot Station; Charging The Battery Pack - Sony Cyber-shot Station CSS-PC1 Operating Instructions Manual

Digital imaging accessories: cyber-shot® station for pc. includes main assy. (css-pc1), ac adapter, ac power cord, usb cable.
Hide thumbs Also See for Cyber-shot Station CSS-PC1:
Table of Contents

Advertisement

Available languages

Available languages

Placing the camera on the 
Cyber-shot Station 
Remove the Adaptor ring, the Conversion lens, 
etc. from the camera.
Attach the camera as shown below.
Insert the "Memory Stick Duo" into the camera.
When you use data in the internal memory,
do not insert the "Memory Stick Duo" into the
camera.
Be sure to turn off the camera before placing it on
or removing it from the Cyber-shot Station.
Tips
You can attach the camera to the Cyber-shot
Station smoothly by aligning the camera to the
right corner of the Cyber-shot Station.
Make sure that the camera is securely attached to
the Cyber-shot Station.
Removing the camera from 
the Cyber-shot Station 
Hold the Cyber-shot Station down when you
remove the camera from the Cyber-shot Station.
Notes
When removing the camera, make sure to lift the
camera straight up. It may damage the camera or
the Cyber-shot Station when some extra is added
to the front or the sides.
1-GB
Charging the battery pack
Place the camera with the battery pack 
inserted on the Cyber-shot Station.
Charging starts automatically. The CHARGE lamp
of the Cyber-shot Station lights up.
When the camera is turned on, the Cyber-shot
Station stops charging the battery pack.
When the charging reaches to Normal charge*,
the CHARGE lamp goes off.
*
Recording and playback time with Normal
charge is approximately 90% of Full charge.
For the time of the full-charge for a completely
discharged battery at the temperature of 25 °C
(77 °F), see the table below.
DSC-T100, DSC-T25, DSC-T20,
DSC-W200, DSC-W90,
DSC-W85, DSC-W80
It may take longer to charge, depending on the
charging condition and environment.
If CHARGE lamp fails to light or blinks for more
than 10 seconds, refer to "Troubleshooting".
Notes
After attaching the camera to the Cyber-shot
Station, the CHARGE lamp may blink for 3 to 10
seconds. This indicates communication between
the camera and the Cyber-shot Station, and it is
not a malfunction.
Charging temperature
The temperature range for charging is 0 °C to
40 °C (32 °F to 104 °F). However, to provide
maximum battery efficiency, the recommended
temperature range when charging is 10 °C to
30 °C (50 °F to 86 °F).
On battery life
The battery life is limited. Battery capacity
decreases little by little as you use it more and
more, and as time passes. If the battery operating
time seems shortened considerably, a probable
cause is that the battery pack has reached the end
of its life. Buy a new battery pack.
The battery life varies according to how it
is stored and the operating conditions and
environment in which each battery pack is used.
Approx.
230 minutes

Advertisement

Table of Contents
loading

Table of Contents