Brother DCP 8045D User Manual page 91

5
Put the envelopes in the MP tray so that they touch the back of
the tray. Do not put more than 3 envelopes in the MP tray at any
one time, or it may cause a jam.
Make sure that the envelopes are neatly stacked and in the
proper position in the MP tray. If they are not, the envelopes may
not be fed properly, resulting in a skewed printout or a jam.
6
Press and slide the paper-width guide to fit the envelope size.
When you put envelopes in the MP tray, please remember the
following;
■
During printing, the inside tray rises to feed envelopes into
the DCP.
■
The side to be printed on must be face up.
■
Put the leading edge (top of the envelope) in first and push
it gently into the tray.
7
Send the print data to the DCP.
8
After you finish the print job, close the back output tray.
6 - 16 USING THE DCP AS A PRINTER