Reset Factory Settings; Waking Up The Device / Wake-Up - Abus Nexello PLBW10000 Manual

2.4. Reset factory settings

2.5. Waking up the device / Wake-up

Press the Link button 3 times quickly (within 1.5
seconds).
Press quickly (within 1 second)
a fourth time and press and hold the Link button for at
least 5 seconds.
The device is now reset to factory settings.
Hint:
This procedure should only be used if the primary
network controller is not capable of acting.
If the device is set to factory default, the status is set
to "not included" and the association settings and
possible configurations are reset to default.
Press the Link button once to wake up the device. It
then establishes a connection to the Z-Wave controller
and transmits the current status.
12
English