Resetting To Factory Settings; Wake-Up / Waking Up The Device - Abus PLBW10100 Manual

2.4. Resetting to factory settings

2.5. Wake-up / Waking up the device

Press and hold the Link button for at least 5 seconds.
Release the button when the red LED stops blinking
and lights up continuously. The device is now reset to
factory settings.
Hint:
Please use this procedure only if the primary network
controller is missing or otherwise not functional.
If the device is set to factory default, the status is set
to "not included" and the association settings and
possible configurations are reset to default.
Press the Link button once to wake up the device. It
will then establish a connection to the Z-Wave
controller and transmit the current status.
12
English