Jensen CD-785 User Manual page 17

RECORDING
The cassette recorder features an Automatic Volume Level Control Recording System
that prevents overloaded or distorted recordings. You can change the volume level as
often as you like during the recording process. It will not have any effect on the volume
level of the recording itself.
Insert a good quality blank tape into CASSETTE DECK with the exposed tape facing
down and the full reel on the left side. Close the cassette door.
A. RECORDING FROM THE RADIO
1. Tap the POWER
2. Tap the FUNCTION BUTTON (#18) to select Radio mode and select AM or FM.
3. Tune to the desired station and insert a blank cassette tape in deck.
4. Press the RECORD
5. Press the PAUSE
B. RECORDING FROM A CD
1. Tap the POWER
2. Tap the FUNCTION BUTTON (#18) repeatedly to select CD mode.
3. Press the PAUSE
cassette. Recording function is now on STANDBY
4. Activate the CD player, and then press the PAUSE
recording.
5. To stop recording, press the STOP
PAUSE BUTTON.
C. RECORDING FROM THE AUX IN
Tap the POWER
1.
Tap the FUNCTION BUTTON (#18) repeatedly to select AUX mode.
2.
3. Connect Line out or headphone out of your external audio device to the AUX IN JACK (#20)
via a 3.5mm plug audio cable (not included). Insert a blank cassette tape into the deck.
Press the PAUSE
4.
cassette. Recording function is now on STANDBY.
5. Press play button of your external audio device to start playback and then release
PAUSE BUTTON at deck to start recording.
6. Press the PAUSE
BUTTON (#7) to turn on the unit.
& PLAY BUTTON to start recording.
BUTTON and then STOP/EJECT
BUTTON (#7) to turn on the unit.
BUTTON first and then RECORD
BUTTON on CD player first, then press the
BUTTON (#7) to turn on the unit.
BUTTON first and then RECORD
or STOP BUTTON at deck when finish.
E16
BUTTON when finish.
& PLAY BUTTON at
BUTTON at cassette to start
& PLAY BUTTON at