Jensen CD-785 User Manual page 15

NOTES:
This player will not only play commercial CDs, but also self-complied CD-R/RW discs.
•
Do not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.
•
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to read all commercial CDs. It will
also read self-compiled CD-R/CD-RW discs, but it may take up to 10 seconds for the
actual playback to begin. If playback does not start, it is likely due to the quality of the
CD-R/RW disc and/or the compatibility of the CD compilation software. The
manufacturer is not responsible for the playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a
malfunction.
FOR WINDOWS USERS:
When using the "Burn a CD" feature to create an MP3 CD in Windows, you must select
the "With a CD/DVD player" option when it asks "How do you want to use the disc?" The
MP3 CD will not play on this unit if you select the "Like a USB flash drive" option or if the
MP3 CD is not finalized.
LOADING THE DISC
1. Tap the POWER
2. Tap the FUNCTION BUTTON (#18) to select CD mode, the CD icon will show on the
LCD DISPLAY (#11) and start to read.
3. Press the CD door OPEN/CLOSE switch to open the CD door, "OP" will show on the
LCD DISPLAY (#11).
4. Place a CD with the printed side facing up inside the tray.
5. Press the CD door to close it.
6. CD search will be performed; the display will show the total number of tracks. If no
CD installed or installed CD is not recognized, display will show "No".
NOTE: CD searching will be performed every time when you switch to CD mode or if you
close the CD door. All CD functions will start responding when the CD searching
is completed.
CD PLAY / PAUSE MODE
1. Press the BUTTON (23) to start playback. The first track of the first disc will be
played. The playing track's number and the time will show on the LCD DISPLAY (#11)
alternately.
2. To interrupt, press the
flashing.
3. Press BUTTON (23) again to resume playback.
STOP MODE
1. If the STOP button is pressed during PLAY or PAUSE, the system will go into stop
mode and total tracks will show on the LCD DISPLAY (#11).
SKIP MODE (SKIP UP
1. During PLAY or PAUSE mode, tap the
track and display the track no. and then remain the PLAY or PAUSE mode.
2. During PLAY or PAUSE mode, tap the
the beginning of the track.
3. After step 2, tap the
CD OPERATION
BUTTON (#7) to turn on the unit.
BUTTON (23) once, the playing track's time will start
/SKIP DOWN
BUTTON (#24) again will go to the previous track.
E14
)
BUTTON (#22), the player will go to next
BUTTON (#24), the player will go back to