Jensen CD-785 User Manual page 16

SEARCH MODE
1. During PLAY mode, press and hold the
start searching forward.
2. During play mode, press and hold the
searching backwards.
REPEAT PLAY
During CD playback, press the MODE BUTTON (#13) repeatedly to select a different
playback mode:
REPEAT ONCE > REPEAT ALL > RANDOM > OFF
This function allows you to repeat 1 single track or repeat all tracks or play all tracks
randomly in the disc.
NOTE: Repeat function is possible in normal or programmed playback.
CD PROGRAMMING
Up to 20 tacks can be programmed to be played in any required order from the CD.
1. Set in CD mode and press the STOP
2. Press the PROGRAM BUTTON (#12) to enable CD programming mode, PROG icon
and program number "P01" will flash on the LCD DISPLAY (#11) to prompt for input.
3. Press the BUTTON (#22) or
4. Press the PROGRAM BUTTON (#12) to confirm, program counter advances to "P02"
and flash to prompt for input.
5. Repeat steps 3 to 4 to enter additional programs. The display will show "FU" when all
the preset locations are full.
6. Press the button to start playback in order.
7. Press the button to stop playback and press it twice to clear all programmed
tracks. "PROG" icon will go off.
CASSETTE PLAYING AND RECORDING
GENERAL OPERATION
STOP / EJECT
FAST FORWARD
REWIND BUTTON
PLAY BUTTON
PAUSE BUTTON
RECORD BUTTON
PLAYBACK
1. Tap the POWER
2. Tap the FUNCTION BUTTON (#18) to select Cassette mode, the TAPE icon and
"tAP" will show on the LCD DISPLAY (#11).
3. Put in the cassette tape.
4. Press PLAY BUTTON to active playback.
5. Adjust the VOLUME CONTROL (#26) to the desired level.
6. Use PAUSE BUTTON when you want to stop playback temporarily.
7. Press STOP / EJECT
BUTTON Press to stop all deck operation. Press again to open
the cassette door.
BUTTON Press to start rapid tape winding forward direction.
Press stop / eject key when the cassette spools stop
turning.
Press to start rapid tape winding reveres direction.
Press stop / eject key when the cassette spools stop
turning.
Press to start playing tape.
Press to stop tape operation temporarily. Press again
to resume.
Press together with play key to start tape recording.
BUTTON (#7) to turn on the unit.
key when finished.
BUTTON (#22) for few seconds, it will
BUTTON (#24) for few seconds, it will start
BUTTON (#14).
BUTTON (#24) to select the desired track.
E15