Blodgett SB-10E-6-6K Specifications

SB-E-6-6K
Convection Steamer with Two Kettles
on an Electric Boiler Base
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Voltage Options
220 VAC, 1 phase, 60 Hz
380 VAC, 3 phase, 60 Hz
415 VAC, 3 phase, 60 Hz
480 VAC, 3 phase, 60 Hz
240/415 VAC, 3 phase, 4 wire
220/380 VAC, 3 phase, 4 wire
48 kW
Stainless steel frame
Stainless steel rear panel
Correctional package
Steam take off kit
Water in "Y" strainer
Spray and rinse assembly
Load compensation timer
Adjustable front flanged feet
One year extended warranty
BLODGETT
www.blodgett.com
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700
Fax: (802) 864-0183
Project
Item No.
Quantity
Model SB-6E-6-6K (two 3 pan convection steamer compartments with
two 6 gallon kettles on a 60" wide, 42 kW electric boiler)
Model SB-10E-6-6K (two 5 pan convection steamer compartments with
two 6 gallon kettles on a 60" wide, 42 kW electric boiler)
CONVECTION STEAMER
304 satin finish stainless steel
Welded stainless steel door with removable inner stainless steel liner
Full perimeter door gasket
Positive lock and seal mechanism with spring release on door
Stainless steel control housing
One piece welded 316 stainless steel cooking chamber with coved corners
Stainless steel pan supports
Stainless steel drip trough integrally connected to drain
Pressureless steam operation
Separate controls for each compartment
Controls accessible through removable side panel
Ready and Cooking indicator lights
60 minute electric timer with audible alarm to signal end of cook cycle
Steam flow to the cooking chamber is cut off when the door is opened
during the cooking cycle and reactivated when the door is closed
KETTLE
Water resistant, 304 stainless steel construction
316 stainless steel interior cooking surface for corrosion resistance
2/3 jacketed, hemispherical design on bottom for superior heat circulation
Tilt mechanism permits kettle to tilt forward 90° to empty
Tubular stainless steel legs containing steam control valve and conden-
sate return pipes
Reversible operating handle with heat proof knob
ELECTRIC BOILER BASE
Full perimeter painted angle iron frame
Reinforced steamer and boiler mountings
Stainless steel exterior
Hinged door(s) with magnetic latch
6" (152 mm) stainless steel legs with adjustable bullet feet on front and
adjustable flanged feet on rear for securing unit to floor
Automatic water level control
Automatic boiler blowdown
Pressure and Water gauges
Pressure control with pressure safety control
Safety relief valve
Cathodic protector
CSD-1 secondary low water cut off
STANDARD FEATURES
208, 240 VAC, 3 phase, 60 Hz for boiler
Electromechanical controls
Split water lines
Startup inspection service by factory autorized service agent
One year parts and labor steamer warranty*
Five year limited steamer door warranty*
* For all international markets, contact your local distributor