Download Print this page
Blodgett SB-10SC Specifications

Blodgett SB-10SC Specifications

Convection steamer on a steam coil boiler base
Hide thumbs Also See for SB-10SC:

Advertisement

SB-SC
Convection Steamer
on a Steam Coil Boiler Base
SB-6SC shown
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
36" (914 mm) wide boiler base cabinet for SB-6SC
and SB-10SC
Stainless steel frame
Stainless steel rear panel
Ball float trap
Load compensation timer
Correctional package
Water in strainer
Spray & Rinse assembly
Steam take-off kit
One year extended warranty
CAPACITY
Model SB-6SC is comprised of two 3 pan compartments
Model SB-10SC is comprised of two 5 pan compartments
Model SB-16SC is comprised of two 8 pan compartments
44 Lakeside Avenue, Burlington, VT 05401 • Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
Project
Item No.
Quantity
Model SB-6SC (6 pan convection steamer on a 24" steam coil boiler base)
Model SB-10SC (10 pan convection steamer on a 24" steam coil boiler base)
Model SB-16SC (16 pan convection steamer on a 36" steam coil boiler base)
STEAMER CONSTRUCTION
304 #4 satin finish stainless steel
Welded stainless steel door with removable inner stainless steel liner
Full perimeter door gasket
Positive lock and seam mechanism with spring release on door
Stainless steel control housing
One piece welded 316 stainless steel cooking chamber
Coved corners
Stainless steel pan supports
Stainless steel drip trough integrally connected to drain
STEAMER OPERATION
Separate controls for each compartment
Controls accessible through removable side panel
Ready indicator light
Cooking indicator light
60 minute electric timer with audible alarm to signal end of cook cycle
Steam flow to the cooking chamber is cut off when the door is opened during
the cooking cycle and reactivated when the door is closed
BOILER BASE CONSTRUCTION
Full perimeter painted angle iron frame
Reinforced steamer and boiler mountings
Stainless steel exterior
Hinged door(s) with magnetic latch
6" (152 mm) stainless steel legs with adjustable bullet feet on front and
adjustable flanged feet on rear for securing unit to the floor
BOILER BASE OPERATION
Automatic water level control
On/off power switch with indicator light
Automatic boiler blowdown
Pressure gauge
Water gauge
Pressure control with pressure safety control
Safety relief valve
STANDARD FEATURES
115 VAC, 1 phase, 60 Hz for controls
Electromechanical controls
Split water line
Startup inspection service by factory authorized service agent
One year parts and labor steamer warranty*
Five year limited steamer door warranty*
*
For all international markets, contact your local distributor.
BLODGETT
www.blodgett.com

Advertisement

loading

Summary of Contents for Blodgett SB-10SC

  • Page 1 Quantity Model SB-6SC (6 pan convection steamer on a 24” steam coil boiler base) Model SB-10SC (10 pan convection steamer on a 24” steam coil boiler base) Model SB-16SC (16 pan convection steamer on a 36” steam coil boiler base)
  • Page 2 Provide Blodgett model SB-6SC (6 pan), SB-10SC (10 pan) or SB-16SC (16 pan) convection steamer with steam coil boiler base. The SB-6SC and SB-10SC shall be mounted on a 24” wide base (an optional 36” base is available). The SB-16SC shall be mounted on a 36” wide base. The SB-6SC is comprised of two 3 pan compartments. The SB-10SC is comprised of two 5 pan compartments.

This manual is also suitable for:

Sb-16scSb-6sc