Advertisement
LCD Screen
Signal Indicator
EN
Probe 1 Meat Set Temp
Probe 1 Meat Current Temp
Probe 3 BBQ HI/LOW Set Temp
Probe 3 BBQ Current Temp
Transmitter Features
Touch Backlight Button
LCD (Liquid Crystal Display) Screen – Displays all icons, temperature
Low Battery Indicator (will show on prob #3)
Remote Range: 500FT
IPX4 Waterproof
Touch Backlight
Tabletop stand, magnet design
Temperature Alarm Mode: beep alarm, vibration alarm, beep & vibration
alarm and silent mode
Low Battery Indicator
Soft Rubber Sleeve
Magnet
Tabletop
Stand
-4-
Button
1
.
/RESYNC: Press to turn on/off the receiver. Press and hold for 3 seconds
to enter the Synchronization/Pairing process.
2 ALARM – Turn on the unit the default is beep alarm mode, press once switch
.
to vibration mode, press again switch to beep and vibration mode, and press
once again to silent mode.
3. ThermoPro: Touch to turn on/off the backlight. Backlight will automatically
turn off after 15 seconds of inactivity.
Installing batteries
Open the battery compartment of the receiver and insert two "AAA" batteries
with correct polarity. Open the battery compartment of the transmitter and
insert two "AAA" batteries with correct polarity.
Turn On/Off Unit
Press the
/RESYNC button on the receiver to turn on/off the receiver;
Press the
/RESYNC button on the transmitter to turn on/off the transmitter.
Operating Instructions
1 Plug the temperature probes into the corresponding probe sockets into the
.
transmitter.
2 The LCD screen will display all icons for 2 seconds and you will hear a "beep",
.
then you will see the current default temperature on the LCD screen. Probe 1
and 2 will display MEAT 160 , probe 3 and 4 will display HI 250
ºF
220 .
ºF
3 If you do not insert the probes into the transmitter, the LCD screen will
.
display "---".
4. When 4 probes are inserted into the transmitter, it will display the current
temperature of each probe.
ºF
and LO
-5-
EN
Advertisement
