Kubota D1503-M-E3 Operator's Manual page 6

2 SAFE OPERATION
3. CHECK BEFORE STARTING & OPERATING THE ENGINE
A Be sure to inspect the engine before operation. Do
not operate the engine if there is something wrong
with it. Repair it immediately.
A Before operation, install the protective devices
(circuits) and safety covers that come with the
engine.
A Before starting the engine, make sure to check
around yourself for added safety.
A If using the engine with co-worker(s), give signals to
each other, before getting started, to protect
yourselves.
A DO NOT allow children or livestock to approach the
machine while the engine is running.
A Before getting the starter activated, set the key
switch to the "ON" (OPERATION) position and make
sure the engine's protective devices (circuits)
function as specified.
A DO NOT start the engine with any other means but
the key switch.
A DO NOT start the engine by shorting across starter
terminals. The machine may start in gear and move. Do
not bypass or defeat any safety devices.
4. KEEP THE ENGINE AND SURROUNDINGS CLEAN
A Be sure to stop the engine before cleaning.
A If the engine and its surrounding are dirty, a fire may
be caused.
A To prevent a fire, keep clean the engine, its surrounding,
radiator, battery, fuel tank, exhaust pipes, muffler and
other pipes and cables all the time.
A "COOL DOWN" the engine to allow it to cool down
gradually. (Run it idling for at least 5 minutes.)
A If you stop the engine without cooling down (idling), the
temperature around the engine may rise suddenly,
posing a danger.