Operating The Engine; Starting The Engine (Normal) - Kubota D1503-M-E3 Operator's Manual

4

OPERATING THE ENGINE

OPERATING THE ENGINE

STARTING THE ENGINE (NORMAL)

To avoid personal injury:
A Do not allow children to approach the
machine while the engine is running.
A Be sure to install the machine on
which the engine is installed, on a flat
place.
A Do not run the engine on gradients.
A Do not run the engine in an enclosed
area. Exhaust gas can cause air
pollution and exhaust gas poisoning.
A Keep your hands away from rotating
parts (such as fan, pulley, belt,
flywheel etc.) during operation.
A Do not operate the machine while
under the influence of alcohol or
drugs.
A Wear proper clothing that is suited
for running the engine safely.
Baggy jacket and pants, towels
around your neck or hanging from
your waist, apron and other improper
clothing are
because they may easily get caught
by the moving parts.
A Do not wear
headphones while operating engine.
A Check to see if it is safe around the
engine before starting.
A Reinstall safety
protective devices (circuits) securely
and clear all maintenance tools when
starting the
maintenance.
A Do not use ether and any other assistant agent to get
the engine started.
A When starting the engine after a long storage (of more
than 3 months), first set the stop lever to the "STOP"
position and then activate the starter for about 10
seconds to allow oil to reach every engine part.
very hazardous,
radio or music
covers and
engine after
1. Set the fuel lever to the "ON" position.
(1) Fuel lever
2. Place the engine stop lever to the
"OPERATION" position.
3. Place the speed control lever to
"MEDIUM SPEED" position.
(1) Engine stop lever
(2) Speed Control lever
(A) "ON"
(B) "OFF"
(A) "STOP"
(B) "OPERATION"
(C) "MEDIUM SPEED"
(D) "OPERATION"