Table of Contents
Advertisement
Installation Manual
| DCPDU2B Series Power Distribution Units
DCPDU2B SERIES DC POWER DISTRIBUTION PANELS
1.0
INTRODUCTION
DCPDU2B Series circuit breaker panels provide distribution and overload protection for 1 to 20 circuits
with circuit breakers that can be field installed/exchanged using a supplied puller tool. The panels
are only two mounting positions (3.5 inches) high.
The panels provide up to 20 breakers single bus 450A or 10A+10B 450A+450A distribution and
alarm capabilities. The A and B sections of the dual-bus panel are fully isolated, can be separately
configured for 24/48 volts and are polarity neutral. Breaker capacities range from 2.5 to 200 amperes.
Breaker alarm is indicated by a dual color LED (green/red) and Form C relay contacts for each bus.
2.0
FEATURES
4
OPERATING MANUAL
Figure 1. DCPDU2B DC Power Distribution Panel
48/24V
POLARITY NEUTRAL
450A bus bar inputs
Single or Dual Feed
Rear panel safety cover standard
Tapered entry for easy insertion
NO or NC alarm contacts
Alarm LEDs
Power Fail form-C alarm
19" & 23" mounting brackets
+1 (208) 635-6400 | www.transtector.com
Advertisement
Table of Contents
