Functional Overview; Inclusion / Teach-In Device - Abus PLBW10100 Manual

Nexello motion detector

Hide thumbs Also See for PLBW10100:

Table of Contents

2. Functional overview

This product supports SmartStart:

SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR code

present on the product with a controller that provides SmartStart integration. No further action is

required, and the SmartStart product will be automatically added within 10 minutes of powering up near

the network.

Slide the holder of the device down.

If your Z-wave controller does not support SmartStart,

follow these instructions for Product Classic Inclusion:

Activate the inclusion mode (teach-in mode) on the Z-

Wave controller. (for more details, please refer to the

Z-Wave controller's user manual)

Press the "+" button (Add / Inclusion) in your Z-Wave

app and follow the instructions to set the Z-Wave

controller to inclusion mode.

Keep the device within reach of the Z-Wave controller.

Remove the safety strip from the battery compartment.

We recommend using only the original Duracell battery

supplied.

Press the Link button 3 times quickly (within 1.5

seconds) to start the inclusion on the device.

The LED starts flashing red for up to 60 seconds

English

Table of Contents