SERENE SC430N Installation Safety First Always observe safety precautions when using any electrical appliance. Read these instructions carefully and retain them for future reference. WARNING • Ensure the appliance is disconnected from the power supply before performing any cleaning or maintenance.
SERENE SC430N Positioning the Fridge Climate Class This fridge is designed to operate within a climate class 5 environment (40°C @ 40% RH). Fridge The location of the fridge may be the single most important decision that will Location extend its life and ensure economical, high performance. Select a suitable location for the fridge away from direct sunlight and heat sources.
SERENE SC430N Setting Up the Fridge Unpacking Remove all packaging material from the inside and outside of the fridge, including the foam base and all adhesive tape holding the cabinet shelves and accessories. Shelves The fridge is supplied with five wire shelves which may be positioned at different heights to suit various products.
SERENE SC430N Operation Automatic Start-Up After the cabinet has been positioned in a suitable place, plug it in and check the following activity. Item Activity An electronic controller runs the fridge and is visible in a cutout Electronic below the sign. The display panel on the electronic controller Controller shows the cabinet internal temperature.
SERENE SC430N Door Lock The fridge is supplied with a door lock bracket, located at the bottom of the door, which can be fitted with a lock. Door Door lock bracket Front panel Loading Product Let the fridge run for three hours before loading it with product the first time.
(see below). SKOPE DO NOT recommend that the setpoint range be changed unless it is absolutely necessary, and then only by small increments at a time. To change the temperature setpoint range 1.
SERENE SC430N Servicing Cleaning Cabinet Wipe the inside and outside of the cabinet with a damp cloth, taking care to keep moisture away from electrical parts. As with any maintenance, ensure the fridge is unplugged from the power supply before cleaning.
SERENE SC430N Troubleshooting For questions about the electronic controller, see page 9. For problems with the cabinet and refrigeration unit, use the following table. Problem Possible Cause Suggestions • Cabinet not operating. • Loss of power supply. • Check mains power supply.
Need help?
Do you have a question about the SERENE SC430N and is the answer not in the manual?
Questions and answers