Advertisement
Table of Contents
Commercial Stainless Steel 80QT Cooler
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
WARNING:
Keep all children and pets away from assembly area. Children and pets should be supervised when they are
in the area of the Cooler construction.
Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them secure!
Assemble on level ground.
For outdoor use only.
Please read all the safety guidelines before usage of your new wood-burning fire pit. The safe burning
guidelines are located below and in your owner's manual. If you have any questions regarding this
product, please call Sunjoy Industries at 1-866-578-6569 from 8:30AM to 5:30PM EST, or email us at
customer.care@sunjoygroup.com , or visit www.sunjoyonline.com for assistance.
ITM.ART. L-BC009PSS-20
Assembly and Care Instructions
IMPORTANT
Advertisement
Table of Contents
Related Manuals for Sunjoy 80QT
Summary of Contents for Sunjoy 80QT
- Page 1 Please read all the safety guidelines before usage of your new wood-burning fire pit. The safe burning guidelines are located below and in your owner’s manual. If you have any questions regarding this product, please call Sunjoy Industries at 1-866-578-6569 from 8:30AM to 5:30PM EST, or email us at customer.care@sunjoygroup.com , or visit www.sunjoyonline.com for assistance.
- Page 2 Parts List Description Cover Handle Cover Cooler Body Body Handle Bottle Opener Cap Catcher Leg 1 Leg 2 Rail Bottle Shelf Wheel (with Brake) Wheel (without Brake) Decorative Ring Bolt M6x12 ( 4 Pre-assembled on C ) Bolt M5x12 (2 Pre-assembled on C) Bolt M5x35 (2 Pre-assembled on B) Washer M5...
- Page 3 Step 2: Set Decorative Ring(L) to Leg (GI & G2). Then Step 3: turn Bottom Shelf (I) upside down. Insert Leg Turn the Assembled Cooler Body (C) 180°. Fix (G1&G2) in Bottle Shelf (I). Assemble Wheels Body Handle (D) on Cooler Body (C) by Bolt (J&K) on the right position.
Need help?
Do you have a question about the 80QT and is the answer not in the manual?
Questions and answers