Connection; Connection Example - Grundig STR 622 TWIN Manual

Connection Example

1 The 3 EURO-AV sockets on the satellite receiver
have many uses. The drawing shows standard
wiring. A second video recorder can be connected
to the decoder socket (DEC). The menus can only
be displayed via the EURO AV TV socket.
2 For VCR playback, the signal path is automatically
looped through to the TV set via the receiver.
3 A connected decoder is automatically linked (eva-
luation of the switching voltage). For decoders that
do not produce a switching voltage, the switching
voltage can be activated when the programme posi-
tion is selected by programming the receiver for the
decoder socket (DEC).
If a terrestrial aerial connector is provided, this can
4
directly be connected with the video recorder
(or TV set).
Ther STR 622 TWIN also produces excellent stereo
5
and mono radio signals. Many radio stations have
been preprogrammed. In radio mode, the TV screen
is blanked. A hifi system can be connected to the
"AUDIO OUT R/L" cinch sockets.
6 For TV sets without EURO-AV socket, the HF output
" " can be used.
For this, assign the modulator to reception unit A
(see section "Assigning the modulator" on page 21).
The modulator output is preset to channel 38. If this
channel should already be used by your video
recorder or a local transmitter, change the channel
(see section "Changing the modulator channel" on
page 21). The TV set must be tuned to the same
channel.
B A
TV
VCR TV
VIDEO
CONTROL
INPUT-SAT
É
950-2150 MHz
R
EURO AV TV
14/18 V 350 mA
AUDIO OUT
L
Decoder
R L
HiFi-Amplifier
220-240 V~
EURO AV DECODER EURO AV VCR
7 The satellite receiver can be controlled via a
specially prepared GRUNDIG video recorder which
is connected to the VIDEO CONTROL socket.
Depending on the video recorder, it is possible to
pre-programme up to 8 different broadcasts.
Connect the cable arriving from the SAT aerial by
8
means of an F-connector to the screw terminal of
the STR 622 TWIN as shown in the figure.
9 Video recorder (VCR) with 2 EURO-AV sockets
In this case, a special Y-Scart cable is necessary
to display the Info tables from the video recorder
on the screen of the TV set (see figure for connec-
tion). For more information, contact a GRUNDIG
after-sales service.
B A
TV
VCR TV
VIDEO
INPUT-SAT CONTROL
É
950-2150 MHz
R EURO AV TV
14/18 V 350 mA
AUDIO OUT
L
AV 2 AV 1
50-60 Hz
VCR
12
7
220-240 V~
EURO AV DECODER EURO AV VCR
50-60 Hz
Y-Scart
VCR
7