Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Grundig STR 6122
Summary of Contents for Grundig STR 6122
- Page 1 S A T E L L I T E T V R E C E I V E R S T R 6 1 2 2 S T R 3 2 2 T W I N...
-
Page 2: Table Of Contents
❒ General Contents of Delivery/Installation and Safety The GRUNDIG twin receiver STR 6122 is equipped Contents of delivery ..........2 with two tuners, input A and B. Installation and safety .......... 2 With these two input tuners you can: Environmental protection ........2 ❒... -
Page 3: Contents Of Delivery
Contents of delivery To use the receiver you will need a suitable satellite 1 stereo satellite receiver aerial, which has been installed and aligned with 1 mains power lead the desired satellite. 1 RF cable 1 remote control unit TP 716 SAT In order to operate this unit properly both input A 2 1.5 V batteries for the remote control unit and input B must be receiving from the same satelite. -
Page 4: Receiver
STR 6122 TWIN TV /VCR ADJ. INPUT A INPUT B 13V/18V 13V/18V MAINS 350mA DC DECODER 350mA DC AERIAL INPUT AUDIO 230V DO NOT REMOVE COVERS 50/60 Hz MADE IN U.K. 30W MAX. HAZARD-LIVE PARTS Front panel Rear panel ❒... -
Page 5: The Keys On The Remote Control Unit 4-5 Explanation Of Keys
The remote control keys not described here have no step by step and switch on from stand- function on the STR 6122. However, they can have by to the last programme position functions for a GRUNDIG TV set or video recorder. - Page 6 Additional Information for Units The TP 716 SAT Telepilot supplied can be used to control not only the STR 6122 TWIN satellite recei- sold in Great Britain ver, but also many GRUNDIG SAT receiver. Units sold in GB are suitable for operation from a It can also be used to operate many video recorders 240 V AC, 50 Hz mains supply.
-
Page 7: Connection Via A Euro-Av Cable
Terrestrial aerial HiFi-Amplifier Satellite aerial /VCR ADJ. INPUT A INPUT B 13V/18V 13V/18V MAINS 350mA DC DECODER 350mA DC AERIAL INPUT AUDIO 230V 50/60 Hz DO NOT REMOVE COVERS 30W MAX. HAZARD-LIVE PARTS MADE IN U.K. Decoder HF cable HF cable After connecting the receiver to the mains supply it is in stand-by. -
Page 8: Terrestrial Reception
Terrestrial reception Tuning the TV set and video recorder to the receiver If you wish to receive also terresrtrial programmes, connect the terrestrial aerial cable to the AERIAL This adjustment can be omitted if you have con- socket on the rear of the receiver. The signal for the nected the receiver via a EURO-AV connecting lead video recorder and the TV set is available at the to the television receiver or video recorder. -
Page 9: Explanation Of The Station Table
If a satellite transmits in the high and low frequency ranges, you will need a universal LNC (for example, Pre-programmed a GRUNDIG LNC UNI 3) for the reception of the two No. Satellite LNC setting frequency ranges. A universal* LNC uses the 22... -
Page 10: Using The Receiver
❒ Selecting a satellite channel To mark a programme as favourite programme, Use the numeric keys on the remote control unit if select the corresponding programme position and you wish to directly enter the number of the desired call up the "Programme position setup" menu. Then programme position (multi-digit numbers must be select "... -
Page 11: Settings
The status display If you press the key on the remote control unit A value which can be changed is flashing in the once, the status menu is briefly displayed on the menu (CURSOR). Change a value with the picture screen. keys. - Page 12 ❒ If you wish to exit the Timer menu without saving, Time ( ; e.g. summer/winter time) press the key. If you wish to use the Timer function (Timer menu), Switch the receiver to stand-by if it is not used the clock and day must be correctly set.
-
Page 13: The Programme Position Setup Menu
❒ The programme position setup menu & Programme position number ( A/B) The programme position number and tuner input is The receiver is already preprogrammed for the cur- displayed for checking. They cannot be changed in rent channels of many satellites. In most cases, a the menu. -
Page 14: The Basic Settings Menu
❒ ❒ Favourite programme ( Video polarity ( To quickly access your favourite programmes, You can select a positive ("+") or negative ("–") video these can be marked (" "). polarity. If no menu is displayed, you can use the ¢... -
Page 15: The Lnc Settings Menu
❒ LO frequency of LNC without 22 kHz – A 09.750 Receiver lock ()) switching signal, satellite selection A. 09.750 LO frequency of LNC with 22 kHz You can lock your receiver. switching signal, satellite selection A. Receiver not locked: "... - Page 16 ❒ 1. DiSEqC switch (up to 4 satellites) LNC arrangement 1 A DiSEqC switch provides you with all connection (one single-range LNC) possibilities. Connection of one LNC with one oscillator frequen- Satellite selection: cy (single-range-LNC). A, B, C, D (for up to 4 satellites). Frequency range selection: Example: –: lower frequency range.
-
Page 17: Multiple Satellite Reception
Some examp- aerial with 2 LNB’s), it is necessary to install a les are explained in detail below. 22 kHz multi-switch (e.g. GRUNDIG SVT 5/4 A) be- tween the receiver inputs A/TV and B/VCR and the two LNB’s (see figure). -
Page 18: Toneburst (Mini Diseqc)
Example: Reception of the low and high frequency range of 2 satellites Tone Burst (Mini-DiSEqC) DiSEqC 1.0 QUATTRO LNCs Universal LNC’s e.g. GRUNDIG LNC UNI Q 1 e.g. GRUNDIG LNC UNI 3 –: lower frequency range (22 kHz switching signal... -
Page 19: Technical Data
The DiSEqC protocol comprises the following pos- Technical Data sibilities: Programme positions: – Polarization H or V. Timer: 4 Events, 28 day Timer Connections: – Selection between lower and upper frequency TV set (TV): 1 x 21 Pin, EURO AV range (–... -
Page 20: Service
Nürnberg 68167 90471 06 21/33 76-70 09 11/7 03-0 ❒ GRUNDIG Europe VGA00063 GRUNDIG BELUX N.V. GRUNDIG NORGE A.S. Deltapark, Weihoek 3, Unit 3G Glynitveien 25, Postboks 234 B-1930 Zaventem N-1401 00 32/2-7 16 04 00 00 47/64 87 82 00 GRUNDIG DANMARK A/S GRUNDIG UK LTD. - Page 21 GRUNDIG AG 90762 FÜRTH • – 8/28 GDP 72010-022.10 0 1 2 3 4 5 6 7 8 9...
Need help?
Do you have a question about the STR 6122 and is the answer not in the manual?
Questions and answers