Table of Contents
Advertisement
Programming Video Recordings
This receiver provides two possibilities of program-
ming video recordings.
1. By means of the four integrated Timers, up to
four programmes can be switched on and off on
the reception unit B for recording at programmed
times.
2. Via the VIDEO CONTROL socket, the satellite
receiver can be controlled by a GRUNDIG video
recorder which is prepared for this function.
Depending on the video recorder, recording of up
to 8 different broadcasts can be programmed.
If at least one Timer is programmed, the Timer LED
on the front side of the receiver lights up. If a Timer
is active, the LED flashes.
SAT Recording Control for the
Reception Unit B via the Internal
Timer
Timer programming is very easy. For example, it is
possible to programme the Timer during a broad-
cast for a different programme without interrupting
the current programme.
1
Press the
Timer 1
Timer 2
Timer 3
Timer 4
Datum
Uhrzeit
TXT = Exit
2
Check the date and time and correct it if necessary
(e.g. winter time to summer time change).
3
Select a free Timer between 1 and 4 (display:
"Timer Aus"). Press the
sub-menu for the Timer data.
Live broadcasts often take longer than intended.
Therefore enter a stop time with sufficient reserve
time to ensure that the programme is completely
recorded.
18
h
key on the remote control.
:
Aus
:
Aus
:
Aus
:
Aus
:
22.06.97
:
18:46
i
key to display the
.
MENUE
Timer 1
:
Programm
:
Datum
:
Start
:
Stop
:
0 . . 4
TXT = Exit
4
Enter the desired programme position, the date, the
start and the stop times with the numeric keys then
store with the
key.
O
5
Press the
¢
key twice to exit the menu.
T XT
EXIT
Do not forget to programme your video recorder to
6
start and stop the AV recording as well.
!
During the programmed recording, the respective
Timer of the SAT receiver is active and the reception
unit B is locked, i.e. it is not possible to change the
programme, to call up the main menu, and to
switch to stand-by. This prevents the recording
from being disturbed by mistake. The message
"Timer aktiv!" is briefly displayed on the picture
screen if you attempt to effect one of the above
functions.
❒
Switching off an active Timer
1
To switch off an active Timer, press the green
key. The following menu is displayed:
Timer 1
:
Timer 2
:
Timer 3
:
Timer 4
:
Datum
:
Uhrzeit
:
i
TXT = Exit
2
Select the menu line marked "Aktiv" using the
] | keys then press the
3
Use the
keys to switch the active Timer off
x c
and save with the
O
4
Exit the menu by pressing the
Ein
1
ARD
22.06.97
21:00
22:15
OK = Store
h
Aktiv
Ein
Aus
Aus
22.06.97
18:46
OK = Store
key.
.
MENUE
key.
¢
key twice.
T XT
EXIT
Advertisement
Table of Contents
