Ryobi ONE + CHT1850P User Manual page 16

GB
F D E
If devices are provided for the connection of dust
Q
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
Q
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
Q
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the
Q
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
Q
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
Q
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
Q
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
Q
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair
Q
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
HEDGE TRIMMER SAFETY WARNINGS
Keep all parts of the body away from the cutter blade.
Q
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material.A moment of
inattention while operating the hedge trimmer may
result in serious personal injury.
Carry the hedge trimmer by the handle with the
Q
cutter blade stopped. When transporting or storing
the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
Keep cable away from cutting area. During operation
Q
I P NL S DK N FIN GR HU CZ RU
English
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
ADDITION
Advice to check the hedge for foreign objects, e.g.
Q
wire fences.
Recommendation for the use of a residual current
Q
device with a tripping current of 30mA or less.
Instruction to hold the hedge trimmer properly, e.g.
Q
with both hands if two handles are provided.
READ ALL INSTRUCTIONS BEFORE OPERATING
Read the instructions carefully. Be familiar with the
Q
controls and proper use of the unit.
Do not operate this unit when tired, ill, or under the
Q
influence of alcohol, drugs, or medication.
Inspect the unit before use. Replace damaged parts.
Q
Check for battery pack leaks.
Make sure all fasteners and guards are in place and
Q
secure. Replace cutting blades or any other parts
that are cracked, chipped, or damaged. Make sure
the cutting blade is properly installed and securely
fastened. Failure to do so can result in personal injury
to the operator and bystanders, as well as damage to
the unit.
Use the right tool. Only use this hedge trimmer for the
Q
purpose intended.
Do not use hedge trimmer if switch will not turn the
Q
unit on or off. A unit that cannot be controlled with the
switch is dangerous and must be repaired.
Clear the area to be cut before each use. Remove all
Q
objects such as cords, lights, wire, or string which can
become entangled in the cutting blade.
Clear the area of children, bystanders, and pets. At
Q
a minimum, keep all children, bystanders and pets
outside a 15 m radius; there still may be a risk to
bystanders from thrown objects. Bystanders should
be encouraged to wear eye protection. If you are
approached, stop the unit immediately.
Do not operate power tools in explosive atmospheres,
Q
such as in the presence of fl ammable liquids, gases
or dust. Power tools create sparks which may ignite
the dust or fumes.
To avoid the risk of electric shock, do not operate unit
Q
in damp or wet locations.
Do not handle the unit with wet hands.
Q
Do not allow children under the age of 15 or untrained
Q
individuals to use this hedge trimmer.
To reduce the risk of injury, always wear full eye
Q
protection, footwear, goggles and clothing when using
this machine.
Wear a face or dust mask if the operation is dusty.
Q
Dress properly. Do not wear loose clothing or
Q
jewellery; they can be caught in moving parts. Use of
11
RO PL SLO HR TR EST LT LV SK BG