Advertisement
Number
1
2
3
4. Position the controller so the front faces the front of the rack, and then slide the
controller gently onto the rails. Stop sliding when the mounting flanges on the front
of the controller touch the vertical face of the rack.
Note: Check the rear of the controller chassis to be sure the chassis is fit
into the stoppers.
Number
1
5. On the front of the controller chassis, attach the two bind screws and washers to
each side of the rack.
Installing your VSP E590 and VSP E790 storage system
Hitachi Virtual Storage System E590, E790 Installation Guide
Step 2: Install the storage system into a rack
Pin
Clip
Washer and bind screw
Stopper
Item
Item
6
Advertisement
