Download Print this page

Where To Go From Here - Hitachi E590 Installation Manual

Virtual storage platform
Hide thumbs Also See for E590:

Advertisement

Before you begin
Log in to the Support
register. When registering, you will be asked for information about the product you
own. For Product Name, enter VSP E Series. Locate your product serial number, which
is labeled MFG. NO. on the rear of the controller.
Obtain the Site ID for the location at which the storage system is installed. If you do
not see your site listed, you will first need to
Procedure
1. Download the
2. Open the Hitachi Remote Ops Installation Guide, and follow the installation
instructions.
3. After you configure Hitachi Remote Ops with the appropriate Site ID, open a
the Support Website
Remote Ops monitoring system is enabled.
Installing Hitachi Remote Ops completes the self-installation of your storage system.

Where to go from here

After concluding the self-installation successfully, perform the following post-installation
activities.
Configure the storage system for the first time
After you complete the self-installation of your storage system, configure the storage
system to suit your requirements using your choice of embedded interfaces, Ops Center
Administrator, Command Control Interface, or REST API.
For more information, see the
Read the release notes
Your storage system undergoes constant development and improvement.
Each time your storage system's firmware is updated, read the
notes provide important information about new features and functions as well as bug
fixes.
Read the latest technical bulletins
Technical bulletins are provided to communicate technical information about your
storage system and to assist you with additional information about the proper use,
handling, and solving of technical issues.
You can
subscribe to receive technical
bulletins
on Hitachi Vantara Support Connect.
Hitachi Virtual Storage System E590, E790 Installation Guide
Website. If you do not already have an account, you will need to
Hitachi Remote Ops
to let us know that your system is installed and that the Hitachi
user
Installing your VSP E590 and VSP E790 storage system
add the
site.
system software and documentation.
documentation.
bulletins, and then you can
Where to go from here
case on
release
notes. The release
access technical
23

Advertisement

loading

This manual is also suitable for:

E790