Engineering Units, which upon download automatically appear in the chosen unit of measure. Wiring the Data Logger OM-CP-QUADVOLT and OM-CP-OCTVOLT Single Ended Wiring (2.5, 15 and 30V) Two-position removable screw terminal connections; accepts 2-wire configurations. OM-CP-QUADVOLT and OM-CP-OCTVOLT Differential Wiring (+-100mV) Three-position removable screw terminal connections;...
Plug the serial cable into the port and verify it is secure. Installing the software Insert the Omega Software Flash Drive in an open USB port. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe. Follow the instructions provided in the Wizard.
0mV and Calibration Point 90-100mV 2.25-2.5V 14.9-15.5V 27-30V Recalibration is recommended annually for any Omega data logger; a reminder is automatically displayed in the software when the device is due. Specifications subject to change. See Omega’s terms and conditions at www.omega.com...
Specifications subject to change. See Omega’s terms and conditions at www.omega.com Still need help? For more troubleshooting tips and information, refer to the built in help section visit us online at www.omega.com or contact us for support at 1 (800) 872-9436.
Page 6
OM-CP-QUADVOLT and OM-CP-OCTVOLT OM-CP-OCTVOLT General Specifications Description OM-CP-OCTVOLT Voltage Range Voltage Resolution *See Table Below Voltage Accuracy Memory 16,383/channel Reading Rate 1 reading every second up to 1 reading every 12 hours LED Indicator None Channels 8 Required Interface Package IFC110 or IFC200...