Cable Routing - Yamaha YFM250XN 2001 Supplementary Service Manual

CABLE ROUTING

1 Rear brake lever switch lead
2 Rear brake cable
3 Cable guide
4 Front brake hose
5 Throttle cable
6 Neutral indicator light
7 Reverse indicator light
8 Handlebar switch assembly
lead
9 Fuel tank breather hose
0 Headlight leads
Å Do not route the handlebar
switch assembly lead through
the lower bracket cable guide.
ı Route the fuel tank breather
hose through the hole in the
handlebar cover and then to the
right of the handlebar (below the
handlebar, not over it). Then,
pass the hose through the cable
guide.
– 7 –
CABLE ROUTING
Ç Fasten the handlebar switch
assembly lead and rear brake
lever switch lead to the handle-
bar with the plastic bands.
Î Fasten the handlebar switch
assembly lead to the handlebar
with the plastic band.
‰ Fasten the handlebar switch
assembly lead and rear brake
lever switch lead underneath the
handlebar. Position the plastic
band with its tab facing down.
SPEC