Table of Contents
Advertisement
User Manual VS
-
Knee support
1. Adjust the knee support in sitting
position to a location approx. 3-4 cm
in front of the legs. Carry out adjust-
ment with the knob on the rear edge
of the seat frame, see photo. Rotate
the knob clockwise to reduce the
distance between the leg and the
knee support and anticlockwise to
in crease the distance.
Knee support - Adjustment of height
1. Release the knee support's locking
knob (1), see photo.
2. Move
the
screw (2) on the leg rest to a suitable
position, see photo.
3. Ensure that the knee support is fully
pushed in against the position screw,
then tighten the knee support locking
knob (1).
Angle gauge
When starting to use the VS seat, it
may be difficult to rise up completely
and require a deal of training to rise up
to full height in the seat. The supplied
angle gauge can be mounted on the seat
frame to give an indication of the user's
progress.
The angle gauge is self-adhesive on the
rear and is mounted on the side of the
seat frame, see photo. Its position can
be varied depending on what accessor-
ies are mounted on the seat - fit it wher-
ever there is space. Fit the angle gauge
to show 0° in sitting position.
Adjustment of position
continuous
position
Adjusting the position of
the knee support.
Mounting the angle gauge.
34
Settings and adjustment
1
2
Knee support.
Advertisement
Table of Contents
