Permobil VS User Manual page 25

User Manual VS Operation
Operation
Shift
Change the control button function by moving
the shift function toggle switch forwards.
Change back by moving the shift function
toggle switch forwards again. The symbols for the
Shift function.
active functions will light up.
Standing
The seat rises to standing position when the
toggle switch is moved forward and lowers to
sitting when the switch is moved back.
The standing function can be configured to
suit each user by pre-programming one of the
Standing function.
three possible standing sequences. The picture
sequence below shows the standing sequence
which starts by straightening the user's hips
and legs before raising them to a standing posi-
tion. This sequence minimises pressure on the
user's knees.
The standard control panel does not feature a
toggle switch for the standing function. On such
models standing is activated by the Leverman
function in the joystick panel. Please see the
section on Leverman in the relevant chassis'
owner´s manual.
Movement of seat to/from standing position with a standing sequence
that minimises pressure on the user's knees.
25