Table Of Contents - Sharp UA-KIL80E Operation Manual

ENGLISH
Thank you for purchasing this SHARP Air Purifier.
Please read this manual carefully before using the product.
This manual should be kept in a safe place for handy reference.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ............................................... The current page
OPERATION PRINCIPLE .................................................................................... 4
PART NAMES ...................................................................................................... 6
BEFORE FIRST USE ........................................................................................... 9
OPERATION ....................................................................................................... 10
CARE AND MAINTENANCE .............................................................................. 14
REPLACEMENT ................................................................................................. 20
TROUBLESHOOTING ........................................................................................ 21
SPECIFICATIONS ............................................................................................... 23
IMPORTANT SAFETY INSTRUCTIONS
Always follow basic safety precautions
when using electrical appliances,
including the following:
WARNING
Always observe the following to reduce the
risk of electrical shock, fire, or injury:
OPERATION
• Read all instructions before using the
product.
• Use only a 220 - 240 volt outlet.
• Do not use the product if the power cord
or plug is damaged or if the connection
to the wall outlet is loose.
• Periodically remove dust from the plug.
• When removing the power plug, always
hold the plug and never pull on the cord.
Failure to do so can cause a short circuit
resulting in electrical shock or fire.
• Be careful not to damage the power
cord. When removing the product, do not
damage the power cord with the casters.
Failure to do so can cause electric
shock, heat generation, or fire.
• Do not remove the plug when your
hands are wet.
• Be sure to remove the power plug
when refilling the Water Tank, before
performing maintenance, when removing
and attaching and replacing the filter and
when not using for a long time. Failure to
do so can cause a short circuit resulting
in electrical shock or fire.
• If the power cord is damaged, it must be
replaced by the manufacturer, its service
agent, a Sharp authorized Service
Centre or similarly qualified persons in
order to avoid a hazard.
Contact the nearest Service Centre for
any problems, adjustments, or repairs.
• Do not repair or disassemble the product
yourself.