Sharp UA-KIL80E Operation Manual page 15

Function
Light Control
You can select the brightness of the Front Display and
Cleanliness Indicator.
Plasmacluster Ion ON/OFF
Auto restart
If the product is unplugged or if there is a power
failure, the product will resume operation with the
previous settings after power is restored.
Adjusting sensor sensitivity (F4 - F6)
Light Sensor
Sensitive Dust Sensor
Odour Sensor
Sound Indicator Setting
You can set the product to make a beeping sound
when the Water Tank is empty.
The interval of Pre-Filter Auto Cleaning
(Only UA-KIL80E)
Turn off
When set to "Turn off", the "Dim" light illuminates for 8
seconds after operation starts and then the light turns
off.
The Humidifying Indicator flashes darker only when the
product needs water.
The Unit Replacement Lamp flashes darker only when
the Plasmacluster Ion Generating Unit need to be
replaced.
Dim
Auto
(default)
Light automatically switches ON or OFF based on room
brightness.
Room is bright : light is ON / Room is dark : light is OFF
Even though room is bright, the light will turn off when
operating in sleep mode.
OFF
ON
(default)
Cancellation
ON
(default)
Low
Standard
(default)
High
Cancellation
ON
720 hours
48 hours
(default)
EN-13
Setting
(default)