Clip / Colp Number Assignment For Ps - Panasonic KX-TD816 Programming Manual

5.3 Extension Programming
[673] C LIP / COLP Number Assignment for PS
Description
Assigns a CLIP / COLP number to each Portable Station.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• CLIP / COLP number: 16 digits (max.)
Default
All PSs – Not stored
Programming
1.
Enter 673.
Display: PS CLIP/COLP
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration numbe .
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:Not stored
4.
Enter CLIP / COLP numbe .
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration numbe .
7.
Repeat steps 3 through 6.
8.
Press END.
Conditions
• Each CLIP / COLP number can be a maximum of 16 digits, consisting of 0 through 9.
• To assign all PSs to one selection, press the key in step 3. In this case, the display shows
the contents programmed for the PS 01.
Features Guide References
Calling Line Identification Presentation (CLIP)
376 DECT Programming