Ps Charge Verification Assignment - Panasonic KX-TD816 Programming Manual

5.3 Extension Programming
[656] P S Charge Verification Assignment
Description
Assigns the PS which is allowed to refer or clear the charge information on the extension,
outside line, account code, and total.
Selection
• PS registration number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• Enable / Disable
Default
All PSs – Enable
Programming
1.
Enter 656.
Display: PS Charge Refer
2.
Press NEXT.
Display: PS NO?
3.
Enter the PS registration numbe .
You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another PS, press NEXT or PREV, or SELECT and the desired PS
registration numbe .
7.
Press END.
Conditions
• To assign all PSs to one selection, press the key in step 3. In this case, the display shows
the contents programmed for the PS which has the lowest PS registration number.
Features Guide References
Charge Fee Reference
360 DECT Programming