Panasonic KX-TD816 Programming Manual page 339

Area Bit
07 15 Selects the bearer when using a
proprietary telephone or DECT portable
station.
16 Reserved
08 1 Reserved
2 Enables or disables the MCID service
even after the caller hangs up. If
enabled, the call will not be
disconnected until you go on-hook.
3-16 Reserved
Selection
• Area code: 01 through 08
• Selection: See "Selection" in the explanation table.
Default
See "Default" shown in the explanation table.
Programming
1.
Enter 990.
Display: System Add Inf.
2.
Press NEXT.
Display: Area NO?
3.
Enter an area code (01 through 08).
Display example: 0010100011000001
4.
Keep pressing
5.
Enter your selection (0 or 1).
To change the current entry, press STORE and enter the new selection.
6.
To programme another bit, repeat steps 4 and 5.
7.
Press STORE.
8.
To programme another area, press SELECT and the desired area code.
9.
Repeat steps 4 through 8.
10.
Press END.
E & M Programming
Explanation
Description
or to move the cursor to the desired bit.
4.6 Optional Programming
Selection Default
0 : 3.1k Audio
1 : Speech
0 : enable
1 : disable
Feature Guide
References
1 ISDN
1 Malicious Call
Identification
(MCID)
339