Supplied Accessories; Soft Ware - ADInstruments PowerLab C Series Owner's Manual

Figure 5–7
Connecting a
Front End
directly to a
computer

Supplied Accessories

MLAC89/1 USB-C to USB-C cable (300mm)
MLAC871 Analog Cable (1 Channel)
MLAC872 Analog Cable (2 Channels)
MLAC874 Analog Cable (4 Channels)
MLAC878 Analog Cable (8 Channels)

Soft ware

LabChart 8:
Front End Interface devices will be detected and listed during LabChart 8's device
detection process. Channels can be enabled in the 'Devices and Channels' dialogue in
the 'Setup' menu. There are no specific settings available for the Front End Interface
itself. All settings for the connected Front End can be found in the Input Amplifier
section of the channel drop down menu.
LabChart Lightning:
Front End Interface devices will be detected during LabChart Lightning's device
detection process.
23
computer. Please note that the USB port must be capable of delivering a
minimum of 15W of power.
Accessory
To
Computer
Owner's Guide