Connecting The Cradle To Your Computer - Blackberry 950 Installation And Getting Started Manual

Connecting the cradle to your computer

4. Click the trackwheel to turn on the handheld. The
Home screen appears.
Connecting the cradle to your
computer
Warning: When you connect the cradle to your computer, use only the
cradle that is provided by Research In Motion Limited for use with your
handheld model.
To connect your handheld to your
computer
1. Insert the end of the cradle cable into a COM port on the back of
your computer.
2. Insert your handheld into the cradle by aligning the connector
port on the bottom edge of the handheld with the connector
prongs of the cradle, and pressing the handheld firmly into
place.
Installation and Getting Started Guide
Connecting the pager-sized handheld to a computer
29