Table of Contents
Advertisement
Söllnerstr. 9
92637 Weiden
info@traeger.de
+49 (0)961 48 23 0 0
3. A dialog appears. In the section "Interface" you can configure the "PLC – Interface" (COM – Port).
4. Set in the section "Bus grip" the tick "Grip allways only one block from PLC", "FB-names", "Bst. Info"
and "check "COM-Ports"
5. Save your configuration by pressing "OK".
6. Now the software is ready to establish a connection to the PLC. Click the symbol "Open" and afterwards
press "PLC". Alternative you can click "File" - "Open" - "PLC".
PG-USB user manual
8 / 23
2021/02/28 16:13
Advertisement
Table of Contents
