Söllnerstr. 9
1 Description
The PG-USB is an active cable for the connection of a Siemens X4/X5 interface to the PC USB port. The
cable does not need any supply from the controller because it is completely supplied from the connected
PC. This supply is also be used so that the cable is active towards the controller.
1.1 Basic circuit diagram
2 System requirements
2.1 Operating system(s)
Windows
10
8
7
Vista
XP
ME/NT/2000
2.2 Software
PLC - programming software (eg PG2000, Step©5, S5 for Windows, WinCC)
2.3 Hardware
USB 1.1 - Connection type A
3 Installation
3.1 Hardware
Plug in the programming cable to the X4/X5 interface of the S5-SPS and with the USB-plug into the USB
port of your computer. The cables are supplied with voltage from the USB port.
3.1.1 Extension set PG-USB
The PG-USB is active toward his control. An extension is sufficient, in which the following pins are placed 1
PG-USB user manual
92637 Weiden
info@traeger.de
+49 (0)961 48 23 0 0
2 / 23
2021/02/28 16:13