Installing the Screw-Down Mount on the Dashboard
Before you can attach the screw-down ball mount to your dashboard, you must select a suitable location on the
dashboard.
It is your responsibility to ensure the mounting location complies with all applicable laws and ordinances, and
does not block your view of the road during the safe operation of your vehicle.
Avoid wires, gauges, air bags, air bag covers, HVAC, and other items when drilling pilot holes and attaching the
mount to the vehicle. Garmin
installation.
Garmin recommends professional installation of the screw-down ball mount.
1 Place the mount
on the selected location.
2 Using the mount as a template, mark the three screw locations.
3 Drill pilot holes (optional).
For some types of mounting material, drilling pilot holes is necessary.
4 Securely fasten the mount to the surface using the supplied screws
5 Insert the ball mount arm
6 Insert the thumbscrew
Getting Started
WARNING
NOTICE
is not responsible for any damages or consequences arising from the
®
NOTICE
into the mount.
into the mount, and tighten it to secure the ball mount arm.
.
5