Adjusting Sound And Notification Volume; Setting An Alarm; Enabling Or Disabling Location Services; Setting The Text Language - Garmin RV 890 Owner's Manual

Adjusting Sound and Notification Volume

1 Select Settings > Device > Sound & Notification.
2 Use the slider bars to adjust the sound and notification volume.

Setting an Alarm

1 Select > Tools > Clock > > .
2 Set a time.
3 If necessary, select the toggle switch to turn on the alarm.

Enabling or Disabling Location Services

The location services feature must be enabled for your device to find your location, calculate routes, and
provide navigational assistance. You can disable location services to plan a route when GPS signals are not
available. When location services are disabled, the device enables a GPS simulator to calculate and simulate
routes.
TIP: Disabling location services can help save battery power.
1 Select Settings > Personal > Location.
2 Select the toggle switch to enable or disable location services.
NOTE: For most uses, you should not change the Mode setting from the default option of Device only. The
device includes a high-performance GPS antenna that provides the most accurate location data while
navigating.

Setting the Text Language

You can select the language for text in the device software.
1 Select Settings > Personal > Language & Input > Language.
2 Select a language.

Date and Time Settings

Select Settings > System > Date & Time.
Automatic time zone: Automatically sets the time zone based on information from the connected network.
Select time zone: Sets the time zone on your device when Automatic time zone is disabled.
Use 24-hour format: Enables or disables the 24-hour time format.

Device Settings

Select Settings > About Device.
Status: Displays the system status and network information.
Legal Information: Allows you to view the end-user license agreement (EULA) and software license
information.
Regulatory information: Displays e-label regulatory and compliance information.
Garmin device information: Displays hardware and software version information.
Device Data Reporting: Shares anonymous data to improve the device.

Restoring Settings

You can restore a category of settings to the factory default values.
1 Select Settings.
2 Select a settings category.
3 Select > Restore.
Settings 49