Mounting And Powering The Device In Your Vehicle - Garmin RV 890 Owner's Manual

Hide thumbs Also See for RV 890:
Table of Contents

Advertisement

Mounting and Powering the Device in Your Vehicle

This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference
with some internal medical devices and electronic devices, including pacemakers, insulin pumps, or hard drives
in laptop computers. Keep the device away from medical devices and electronic devices.
Before you use your device on battery power, you should charge it.
1 Open the lever
, press the suction cup to the windshield, and flip the lever back toward the windshield.
The lever must be oriented toward the top of the windshield.
2 Plug the vehicle power cable into the port
3 If necessary, loosen the thumbscrew on the suction cup arm
the mount for better viewing and operation.
Getting Started
WARNING
on the mount.
and the nut on the ball mount
, and adjust
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Camper 890Rv 1090Camper1090

Table of Contents