Hukseflux SR30-M2-D1 Manual

To:
Purchasers, installers and users of the new SR30-M2-D1
From:
The Hukseflux Team
Subject: Overview important changes SR30-M2-D1

Introduction

Congratulations with your purchase of the new SR30-M2-D1 pyranometer!
SR30-M2-D1 is the successor of the popular SR30-D1 pyranometer. Both are digital spectrally
flat Class A (secondary standard) pyranometers, with heating, internal ventilation, tilt sensor
and Modbus over RS-485 output. These fine instruments are made to serve you for a long time.
1) If this is your first SR30: then please follow SR30-M2-D1 installation instructions
in the SR30-M2-D1 user manual. A copy is sent with your Order Confirmation.
2) If you are replacing an older SR30-D1 or adding SR30-M2-D1 to a system or
network including SR30-D1's: then please read this document first. It provides a
brief overview of the key differences between SR30-M2-D1 and the SR30-D1 model,
as well as a short installation guide for SR30-M2-D1. Following its instructions allows
you to benefit from the improvements SR30-M2-D1 offers:
2.1) If you keep using the cabling previously used for SR30-D1:
SR30-M2-D1 can be used with the same 5-pole M12-A connectors and cables
used for SR30-D1 model. However, in order to profit from the improvements
offered by SR30-M2-D1, it is recommended to make minor wiring
modifications. Please read the Specifications and Installation sections in this
memo carefully.
2.2) If you use new cabling: please read the Specifications and Installation
sections in this memo carefully, followed by the SR30-M2-D1 user manual.
SR30-M2-D1 important changes memo v2009
Hukseflux Thermal Sensors B.V.
Delftechpark 31
2628 XJ Delft
The Netherlands
Tel: +31 [0]15 2142669
Fax: +31 [0]15 2574949
URL: www.hukseflux.com
E-mail: info@hukseflux.com
Memo
Pages: 6
Date: 27 NOV, 2020
Your reference: -
Our reference: -
page 1/6