Adjusting the seat with a front to rear angle
Loosen seat guide adjusting bolts using a 6mm Allen wrench provided in the charger bag
and a pair of pliers or a 13mm open end wrench. Place the seat receivers in the lowest
position and insert the ball detent pins through the towers and seat receiver legs. Leave
the seat guide adjusting bolts loose. Slide the seat into the receivers, adjust seat to the
desired height and angle using the (4) detent pins. Leave the seat in the seat receivers
and tighten the seat guide adjusting bolts. This process is more easily accomplished with
two people.
Front Seat
Locking
Handle
COMFORT SETTINGS
Adjusting Pins
Bottom of
Seat
Seat Guides
Seat Angle
18
Seat Guide
Adjusting Bolts
Seat Towers