Golden Compass HD GP620 SS Owner's Manual page 17

BATTERY INSTALLATION
The batteries weigh 37 pounds each. Please ask for help if you do
not feel capable of safely lifting that much weight.
Figure 7
Make certain that the controller power is turned off and that the
chair is NOT in freewheel mode before attempting to perform assembly or
disassembly.
1. Place the batteries in the battery box. Be certain to position the terminals on each
battery toward the front of the unit as shown in Figure 7. Secure the batteries in place
using the hook and loop straps.
2. Use the screws, washers, and nuts provided to connect the positive (red booted)
connector of each cable to the posi-tive (+) terminal of each battery. See figure 8.
3. Use the screws, washers, and nuts provided to connect the negative (black booted)
connector of each cable to the negative (-) terminal of each battery.
4. Connect the connectors of each bat-tery cable to the corresponding connector on the
main wire harness. See figure 9.
5. Cover the battery terminals with the protective caps provided. See figure 9.
ASSEMBLY
Figure 9
16
Battery
Figure 8