Golden Compass HD GP620 SS Owner's Manual page 14

JOYSTICK INSTALLATION
1. Position the joystick on the joystick bracket. Match the holes in the joystick with the
holes in the bracket. See figure 1.
2. Insert the 4 Allen head screws with lock washers through the bracket and into the
holes in the joystick.
3. Use an Allen wrench to tighten the screws.
4. Connect the joystick cable to the controller cable. See figure 2.
5. Use the provided Velcro tie-wraps and under arm clip to secure the controller cable to
the armrest bracket.
Allen-head screws
ASSEMBLY
Figure 1
Joystick Cable
Figure 2
13
Joystick Bracket