Download Print this page

Inalto ARCBBQ User Manual page 5

Bbq canopy rangehood
Hide thumbs Also See for ARCBBQ:

Advertisement

• Ensure the cooker hood is switched off before
carrying out maintenance, to avoid any
possibility of electric shock.
• Never carry out flambé cooking under the
cooker hood.
• This cooker hood is not suitable for use over
barbecues.
• This cooker hood cannot be installed for
external use- only to be installed indoors.
• The Aluminium grease filters must be
removed every four weeks (at a maximum) for
cleaning to reduce the risk of fire.
• The exhaust from the cooker hood must not
be discharged into any heating flue, which
may carry combustion products from other
sources.
• Exhaust air must not be discharged into a wall
cavity, unless the cavity is designed for the
purpose.
• There shall be adequate ventilation of the
room when the range hood is used at the
same time as appliances burning gas or other
fuels (not applicable that only discharge the
air back into the room).
• Regulations concerning the discharge of air
have to be fulfilled.
• There must be adequate ventilation of the
room when the cooker hood is used at the
same time as appliances burning gas or
other fuels.
• Your new rangehood is guaranteed against
electrical or mechanical defects, subject
to certain exclusions that are noted in the
Warranty Terms and Conditions (at the rear
of this user manual). The foregoing does not
affect your statutory rights.
• Always cover lit gas burners with pots or pans
when cooker hood is in use.
• Always switch off gas burners before you
remove pots or pans.
• Do not leave lit gas burners exposed due to
the risk of fire.
ELECTRICAL CONNECTION
Check that the mains voltage matches with
the voltage on the data plate inside the cooker
hood. Check that the installation complies
with standards of local building, gas and
electrical authorities. Before connecting to the
mains supply ensure that the mains voltage
corresponds to the voltage on the rating plate
inside the cooker hood.
WARNING: If the supply cord is damaged, it
must be replaced by the manufacturer or its
service agent or similarly qualified person in
order to avoid a hazard.
WARNING: All electrical work must be done in
accordance with local and national electrical
codes as applicable and should be undertaken
by licenced and qualified persons only.
UNPACKING
During transportation, protective packaging
was used to protect the appliance against any
damage. After unpacking, please dispose of
all elements of packaging in a way that will not
cause damage to the environment.
All materials used for packaging the appliance
are environmentally friendly; they are
100% recyclable and are marked with the
appropriate symbol.
CAUTION: During unpacking, the packaging
materials (polythene bags, polystyrene pieces,
etc.) should be kept out of reach of children.
5

Advertisement

loading

This manual is also suitable for:

Arbc90tps