Advertisement
two exhaust pipes onto the one-way-valve as shown below.
Chimney Installation
• Put the upper chimney into the lower
chimney. Mark and drill 4 holes into Plate I.
Fasten the lower chimney on the wall with 4
– Put the upper chimney into lower chimney .
wall plugs and 4 x ST4 × 30mm screws.
Mark and drill 4 holes depend on the plate I. Fasten the lower chimney on
the wall with 4 wall plugs and 4×ST4×30mm screws.
PLATE I
C O N T I N U E D
UPPER
CHIMNEY
LOWER
CHIMNEY
I N S TA L L AT I O N I N S T R U C T I O N S
I N S TA L L AT I O N I N S T R U C T I O N S
• Slide the upper chimney to adjust the
chimney height. When the height required is
reached, drill 4×8mm holes to accommodate
Plate II.
• Screw and tighten the Plate II onto the wall
with 4 wall plugs and 4 x ST4 × 30mm. Then,
fix the lower chimney with 2 x ST4 × 8mm.
SCREW PLUG
SCREW
(4mm x 30mm)
13
C O N T I N U E D
C O N T I N U E D
–
–
–
–
ST4 x
8mm
–
–
–
–
WALL PLUG
ST4 × 30mm
ST4 × 8mm
SCREW
(4mm x 8mm)
Advertisement
