Table of Contents
Advertisement
EXPERT 2V3SA
Reset Water Alarm ? — If a water alarm
is on (high or low water consumption
or water spill alarm), select "Yes" to ac-
knowledge the alarm condition. Note that
when a reset is made, the controller needs
48 hours to gather new consumption data
before it can start monitoring the high/
low water consumption alarms again (no
consumption alarms can happen by the
end of this 48-hour delay). *This parameter
is accessible if a water alarm is on.
48
EXPERT 2V3SA, rev.10
12.2.
Water Consumption
12.2.1. History
The controller provides a pulse input to
monitor the water consumption. The water
consumption is logged into an history menu
for the current day and for the past 6 days.
1. From the main menu, select: WATER
HISTORY.
01/31/0X
1241l
01/30/0X
6189l
(This menu is accessible if the water meter is
enabled in the User Setup Menu.)
2. The water consumption history is dis-
played Press the down-arrow key to scroll
down the water consumption history.
12.2.2. Water Consumption of the
Last 48 Hours
1. From the main menu, select: LAST 48-
HOUR WATER.
L.24Hr Water
usage:
123L
The water consumption of the last 24 hours
is displayed. *This menu is accessible if the water
meter is enabled in the User Setup Menu.)
2. Press the down-arrow key to see the wa-
ter consumption of the previous 24 hours
(i.e. 24 hours that are preceeding the last
24 hours).
P.24Hr Water
usage:
234L
Advertisement
Table of Contents
