Lifting Unit - Car-O-Liner Speed Instruction Manual

Car-O-Liner Group AB
1.2.1

Lifting unit

Mechanical safety lock [5]
8
The hydraulic lifting unit is specially designed for the Speed lifting platform.
It is used to lift the working platform with a vehicle standing on the pads.
The lift simplifies the set-up procedure of the vehicle and it improves
working conditions by offering a choice of working heights.
The hydraulically-operated lifting unit consists of a scissors lift, see Figure
1.2, and a hydraulic power unit, (refer to a separate Instruction manual).
The lift consists of a base frame [1] on to which scissor arms [2] and
hydraulic cylinders [3] are attached. The cylinders are operated by an
external hydraulic power unit (refer to the separate Instruction manual). The
lift is anchored to the floor by foundation bolts [4], refer to Section 3.6. The
base frame is equipped with a mechanical safety lock [5] which prevents the
lift from dropping.
Base frame [1]
Figure 1.2 Speed scissors lift.
Speed Lifting platform
Scissor arm [2]
Hydraulic cylinder [3]
Foundation bolt [4]
32750, EN - rev. 7, 2018-04