Transport; Packaging And Delivery Inspection; Installing The Lifting Platform - Car-O-Liner Speed Instruction Manual

Speed Lifting platform
3.3

Transport

3.4

Packaging and delivery inspection

3.5

Installing the lifting platform

32750, EN - rev. 7, 2018-04
WARNING! The lifting platform is heavy (weight 550-600 kg, 1,200-
1,300 lbs). Use only approved lifting equipment to avoid accidents. Risk for
injuries.
Use a forklift to move the lifting platform. The forklift must have a fork
width of at least 850 mm (34 in). The lift must be centered along the long
side of the lifting platform.
IMPORTANT! Take care during transport. Risk of sliding.
Check the delivery against the packing list, consignment note, or other
delivery documentation to verify that everything is included in the correct
quantity. Check the lifting platform carefully to make sure that no damage
has occurred during transport. If any part is damaged or missing, the lift may
not be used until the component is repaired or replaced. Please contact your
supplier.
Remove all packaging material, including the transport tape, from the lifting
platform.
For the power unit, refer to a separate Instruction manual.
IMPORTANT! It is the responsibility of the owner to ensure that the
equipment has been installed as specified in the instructions provided. It is
also the owner's responsibility to ensure that the lift is inspected in
accordance with current and local regulations before it is used.
Note! During installation, platform and lift must be strapped together.
Do not lift the working platform only!
1 Make sure that the transport tape is removed from the lifting
platform and the lift unit.
2 During installation, the platform and lift must be strapped
together. Do not lift the working platform only. Place the lift in
final desired position before cutting the straps.
Car-O-Liner Group AB
21